Call Us Anytime 845-293-2318 Welcome  Login? | Register |  Product Search | View Cart 

Shop by Category
 

Online Payments




Sanifect D2 AFCO 5503 AX707


The RTU-D2 from Zep is no longer available, this is the same product with minor differences.

Sanifect D2 (AFCO 5503) is a no rinse, ready-to-use, EPA registered sanitizer approved for use on food contact surfaces. It evaporates quickly, so it is ideal to use in water sensitive areas. AFCO 5503 is a combination of isopropyl alcohol and a powerful quaternary ammonium compound which eliminates 99.999% of detectable pathogens on hard, nonporous surfaces.


     
Sanifect D2 AFCO 5503


SANIFECT D2 (AFCO 5503)
Sanifect D2 (AFCO 5503) is a no rinse, ready-to-use, EPA registered sanitizer approved for use on food contact surfaces. It evaporates quickly, so it is ideal to use in water sensitive areas. AFCO 5503 is a combination of isopropyl alcohol and a powerful quaternary ammonium compound which eliminates 99.999% of detectable pathogens on hard, nonporous surfaces.

FEATURES BENEFITS

  • Safe for Food Contact Surfaces
  • Highly Evaporative/No Rinsing Required
  • Excellent for Packaging Areas, Scales, Display Cases
  • Will Not Impart Taste onto Food
  • Ready to Use - No Dilution/No Mistakes
  • Consistent Measurable Results
  • Non-Corrosive to Tools and Metals

    DESCRIPTION
    Recommended as a no-rinse sanitizer for dairy, poultry processing, red meat processing, beverage plants, food service locations, restaurants and other food processing facilities.

    PHYSICAL PROPERTIES
    Appearance. . . . . . . . . . . . . . . Clear, colorless liquid
    PPM Quat . . . . . . . . . . . . . . . . . . . 180 to 220 ppm
    Odor . . . . . . . . . . . . . . . . . . . . . . Alcohol odor
    Density . . . . . . . . . . . . 7.56 lbs./gallon
    pH (as is) . . . . . . . . . . . . . . . . . . 8.0 to 8.7

    DOT Shipping Label . . . . . . . . . .Flammable liquid

    DIRECTIONS FOR USE:
    It is a violation of federal law to use this product in a manner inconsistent with its labeling. Apply with a sponge, cloth, or mechanical sprayer, or by total immersion. When applied with a mechanical spray, spray should be coarse. Surfaces must be sprayed until thoroughly wetted. Treated surfaces must remain wet for 1 minute.

    Cleaning in Wet Environments:
    Remove gross food particles and soil from surface. Apply this product without dilution to the surface. Water rinse or wipe clean. Allow to dry.

    Cleaning in Dry Environments:
    Remove gross food particles from soil and surface. Apply this product without dilution to the surface. Wipe clean. Allow to dry.

    Sanitizing of Food Processing Equipment:
    Prior to application, remove gross food particles and soil by a pre-flush or pre-scrape and when necessary, presoak. Then thoroughly wash or flush objects with a good detergent or compatible cleaner, followed by a potable water rinse before applications of the sanitizing solution. For sanitizing food processing equipment, dairy equipment, food utensils, dishes, silverware, glasses, sink tops, countertops, refrigerated storage and display equipment. Wash and rinse all articles thoroughly, then apply this product. Apply to sink tops, countertops, refrigerated storage and display equipment by sponge, cloth, brush or coarse spray. Surfaces should remain wet for at least one minute followed by adequate draining and air-drying. Use fresh solution in all applications. Dishes, silverware, glasses, cooking utensils and other similar size food processing equipment can be sanitized by immersion in this product. No potable water rinse is required. This product is an effective sanitizer against Staphylococcus aureus (ATCC 6538) and Escherichia coli (ATCC 11229) on hard nonporous surfaces. Treated surfaces must remain wet for 60 seconds. Allow to air dry. This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.

    ACTIVE INGREDIENTS:
    Isopropyl Alcohol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50.0000 %
    Alkyl (60% C14, 30% C16, 5% C12, 5% C18,) dimethylbenzyl ammonium chloride . . . . . . . . . . . . . . . . . . 0.0100%
    Alkyl (68% C12, 32% C14) dimethy ethyllbenzyl ammonium chloride . . . . . . . . . . . . . . . . . . . . . . . . 0.0100%%
    Dioctyl Dimethyl Ammonium Chloride . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0100%
    Inert Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49.9800%
    TOTAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100.0000 %

    DANGER:
    Flammable liquid and vapor. Do not use near fire, hot surfaces, or electrical sparks. Avoid storage at elevated temperatures. Causes serious eye irritation. Consult the product’s Safety Data Sheet (SDS) for complete safety information.

    NOTE:
    AFCO 5503 meets current EPA Regulatory Standards, 21 CFR 178.1010, and is approved as a no-rinse sanitizer safe on food contact surfaces. Also, meets previously accepted USDA standards for the D2 rating.

    -Shipping is flat rate, Plus $32 for the Hazardous Material Surcharge

    -Sales tax applied if you are in: NY



    
Site Map   |   FAQS   |   Contact Us   |   Privacy Policy   |   Security   |   Terms